Rapid Deploying Hose Bag (WHT-BGHOPUM)
Made of durable 18 oz PVC coated textile, it is designed to easily and quickly deploy five lengths of 100’ (30.5 m) pre-coupled 1-½” (38 mm) hose wound in figure 8 patterns. The hose is dispensed so that it lays flat allowing for quick hassle free pressure up of the hose. Simply open up the hose port flap, put on the pack and walk out the hose.
Universal Hose Wrench (B-2066)
For use in coupling and uncoupling 1″ (25 mm), 1 1/2″ (38 mm), 2″ (51 mm) hose line couplings, swivel hose fittings, pin or rocker lug couplings. Light, corrosion resistant anodized alloy. 7″ (180 mm). 4 1/2 oz (128 g).
BER-7-4000 Forestry wrench
BER-7-4030 Combination Forestry Spanner
Wildfire Hose Strangler (B-5420)
Specifically designed for thin walled synthetic hoses, it has two positions or settings for different hose wall thickness 1/4” or 1/8” (6 or 3 mm). Replaceable rubber shoe prevents damage to hose. Light, corrosion resistant alloy. 11 1/2” (29 cm) long. 1.5 lbs (682 g). Can be carried in belt pouch FA-149. The B-5420 models have two “settings” that are designed to accommodate hose strangling for hoses of different thickness (single-jacket, double-jacket, etc…). One setting “squeezes tighter” than the other.
- FA-149 Standard pouch for B-5420.
- B-5420P Hose Strangler Painted Red.
- A-5415R Rubber shoe
Staflo – Weeping Hose (SPEC 2160)
Single jacket 300 PSIG (2100 kPa) all polyester, weeping hose for self-protection.
- Construction: Circular woven, single jacket 100% filament polyester.
- Tube: Extruded T.P.U., a superior ozone and age resistant elastomer.
- Length: MFG standard lengths up to 100’ (30.5 m).
Hard Rubber Suction Hose (BUC-263-10)
Wire-reinforced suction hose is designed to give maximum service life under almost any condition. Not recommended for tandem operation, nor where heavy equipment will pass over the hose. Available in 1” to 4” diameter (25 to 102 mm) in any length up to 50’ (15,2 m). Delivered with male and female rocker lug aluminum couplings.
Draftex® Suction Hose
Lightweight single jacket rigid suction hose, all polyester with helical reinforcement. Durable, flexible and compact. This suction hose will withstand 600 psi (4200 kPa) test pressure and is recommended for tandem operation. Comes with 2” (51 mm) male and female NPSH or NH coupling.
PVC Suction Hose (MK-150-8)
Reinforced lightweight PVC hose, specially designed for the Mini-Striker® to withstand 70 psi (482 kPa) test pressure.